131 transmission in 124 Spider

Pictures and stories about your FIAT(s)
Post Reply
User avatar
SimcaBertone66
Posts: 672
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

131 transmission in 124 Spider

Post by SimcaBertone66 » Sun Oct 09, 2016 7:52 pm

131 trans in 124 Spider with Tilton pedal assembly and custom fabricated hydraulic clutch actuation. Very smooth and dead reliable. Off the shelf parts and custom fabrication required.... Millers Mule aluminum flywheel, clutch plate pinned to flywheel and ARP fasteners for fixing flywheel to crankshaft. Shift lever modified from stock 131 leaving cast arm that enters the transmission to be reconfigured....heated and bent to a more user friendly distance from the driver. A hands bredth away from drivers hand
Attachments
IMG_0084.JPG
IMG_0084.JPG (711.38 KiB) Viewed 1043 times
IMG_2536.JPG
IMG_2536.JPG (204.09 KiB) Viewed 1043 times
Joe DeGasperis
User avatar
friedman
mille club
Posts: 1838
Joined: Wed Aug 24, 2016 8:13 am
Last Name:

Re: 131 transmission in 124 Spider

Post by friedman » Mon Oct 10, 2016 9:04 am

And I thought I had too much free time.
Carl in Virginia
75 spider
83 Bertone
User avatar
SimcaBertone66
Posts: 672
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

Re: 131 transmission in 124 Spider

Post by SimcaBertone66 » Mon Oct 10, 2016 9:43 am

[expletive] Carl, I was still gainfully employed when this was done in 2007.....
Joe DeGasperis
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest