Troubleshooting non working speedo

The forum for all of your technical questions on your classic FIAT autos
Post Reply
User avatar
bnam2
Posts: 142
Joined: Sat Jan 20, 2018 4:34 am
Last Name: Nambisan
First Name: Byas

Troubleshooting non working speedo

Post by bnam2 » Sat Jan 19, 2019 9:35 am

When I got my Cabrio, the speedo was not working. The cable sleeve looked shot, so I got a new cable & sleeve. Before I installed it, I tested the speedo with a cable end attached to my drill -- and the speedo worked when the cable was spun counter clockwise. But, after installing the new cable I still did not see any change -- speedo was still not working.

I pulled out the cable at the speedo end and had it handing out under the dash as I drove around the neighborhood. The cable was not turning. However, if I slightly pushed in the cable with my thumb, I could it feel it rotate.

So, I though that perhaps the cable was not seated properly on the drive end. I removed the cable and refitted again at the drive end. Still no change!


What's going on? Should I pull out the drive and check it out? Are there any instructions anywhere on drive disassembly and reassembly?

Thanks!
Byas
1965 Fiat 1500 Cabriolet with 1600twin-cam
!971 VW 1302LS Convertible in original condition
1965 KG - under restoration
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests